2500 mm Architecture Glass Washing Machine / Glass Processing Machinery

2500 mm Architecture Glass Cleaning Machine / Glass Processing Machinery
 
 
Specifications:

 
Description:
 
The 2500 mm Architecture Glass Cleaning Machine , Glass Washing And Drying Machine is a horizontal
glass washing and drying machine, which is widely used in cleaning various kind of flat construction glass
with the thickness between 3mm and 19mm. it adopts the lifting structure, and the drying part can be whole lifted. After the glass placed on the transfer rollers, it go through from feed in part, disc brush washing part, hair brush washing part, drying part to feed-out part finally.
 
1. The machine is composed of feed-in part, washing part, drying part,feed-out part and upper box. 
2. Feed-in Part including high pressure spraying,water tank, water blocking air knife ( Standard equipment
without this configuration ).
3. Washing Part including disc brush and hair brush part. 1 set of disc brush and 3 pairs of hair brush,
 water-stop plate between each brush, the upper and lower brush, each part equipped with a brush motor, three water tanks with the function of water overflow and drainage.
4. Drying Part and Washing Part can be whole lifted.
5. Drying Part equipped with three pairs of air knife, which including two pairs of straight air knife and one
pair of oblique air knife.
6. Lifting can be adjusted by rotary switch and counting device in accordance with the thickness of the 
glass,max height is 400mm.
7. Conveyor with bevel gear.The feed-in part is equipped with water pan,which has the function of 
self-cleaning.  
 
 
Applications:
 
The 2500 mm Architecture Glass Cleaning Machine , Glass Washing And Drying Machine is mainly used
to clean the surface of the architecture glass after grinding. It is composed of Feed-in Part → Dis Brush Part → Hair Brush Part→ Drying Part → Feed out Part. If it is used to clean the normal architecture glass, 
cancel the Disc Brush Part properly.
 
 
Competitive Advantage:
 
1. All stainless steel and industry aluminum profile
2. Small machine
3. Pure nitrile conveyor rubber roller
4. Quick coupling
5. Nylon gear transmission drive
6.1 set of disc brush
7. 3 pairs of brush
8. 3 pairs of air knife 
9. Lead screw lifting
10. Lighting detection
11. Water tank with heating system
12. PLC automatic control system or manual work
13. 1 year Warranty 
14. Engineers available to service machinery overseas

 
Main Technical Parameters:
 

 
 
2500 mm Architecture Glass Cleaning Machine , Glass Washing And Drying Machine