Payment & Shipping Terms:
|Product Name:||20 Spindles Glass Edging Machine , Glass Double Edger For Architecture Glass||Application:||Architecture Glass Deep Processing Industry|
|Glass Maximum Size:||2500 Mm||Glass Minimum Size:||300×300 Mm|
|Glass Thickness:||3-19 Mm||Speed:||1-8 M/min|
|Standard:||CE||Motor/Spindle:||10+10, 11+11, 12+12|
glass edge grinding machine,
glass processing machines
20 Spindles Glass Edging Machine Glass Double Edger For Architecture Glass
Shield of Ampere Meter
Spindle Water Tank
The Motor of Grinding Head
Note: We can produce customize machine according to your requirements.
This 20 Spindles Glass Edging Machine , Glass Double Edger For Architecture Glass is used for grinding
various kinds of flat glass, single 10 spindles for grinding and polishing the double sides of straight-line
flat edges and chamfering the upper and lower arise of the flat glass at one time, which requires a higher
dimensional accuracy and polishing precision, such as flat architecture door glass, window glass etc.
The Display of 20 Spindles (Single Side):
3 diamond wheels for grinding the flat edge of both straight line sides of glass
1 diamond wheel for grinding the upper arris
1 polishing wheel for polishing the upper arris
1 diamond wheel for grinding the lower arris
1 polishing wheel for polishing the lower arris
3 polishing wheels for polishing the flat edge of both straight line sides of glass
1. The clamping, opening and closing is controlled by frequency conversion, and it eliminates mechanical
clearance by changing quick or slow speed. It ensures the width accuracy of glass.
2. Main transmission adopts the design of through going shaft which ensures the bilateral synchronicity.
parallel of processing glass and the uniformity of chamfering. Frequency control that the transfer speed
can be adjusted.
3. The glass is clamped by the control of electric machinery.
4. Polishing adopts pneumatic.It also has the function of automatic compensation.
5. The design of locating detent, it ensures the diagonal tolerance of processing glass.
6. Upper chamfering can be automatic rising and lowering, according to the glass thickness.
7. Spindles: 11+11 Spindles
8. Output part has cleaning water spray and block water device of air knife, in order to prevent the glass
9. Output part has air knife for expelling water.
1. Main transmission shaft is placed on the upper of machine, which extends main shaft life and easy to
replace synchronous belt.
2. The design of catch pawl ensures the high precision of glass diagonal.
3. Unique design of grinding head that improves the running accuracy and impact resistance of the
grinding head and prolongs the service life of the motor.
4. The design of three-point lifting pillar ensures perfect straightness.
5. The upper design of down chamfering motor ensures the completeness of sliding table, and keeps the
machine structure more stable.
6. Automatic lubricating system extends equipment life.
1. Corner Dubbing
3. High Polishing Wheel
Main Technical Parameters:
Max. Width of Glass
Min. Size of Glass
20 Spindles Glass Edging Machine , Glass Double Edger For Architecture Glass